Os-engines 61LX-H Manuel d'utilisateur télécharger pdf (Page 21)

INSTALLATION OF THROTTLE SERVO

After the engine in the helicopter, please observe the

following recommendations when linking the throttle

servo to the carburetor.

Locate the servo so that its output arm and the throttle

pushrod are, as closely as possible, directry in line with

carburetor's throttle arm, as shown.

Servo output arm

Throttle control rods A and B should be of equal length.

Set the linkage so that the servo output arm and throttle

arm are parallel when the throttle stick on the transmitter

is at its mid position. If differential throttle movement is re-

quired, make necessary adjustment at the transmitter.

Throttle arm

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Os-engines 61LX-H Manuel d'utilisateur Page 21